Ostomy paste is actually not a paste at all. It is the consistency of paste but it is used more like a caulk than a glue or an adhesive. The caulk like paste is used to fill in uneven skin contours to help create a flatter surface. A flatter surface is important because the ostomy wafer
will adhere better if it is completely flush against your abdomen. The ostomy wafer will not stay in place if there are gaps between the wafer and your skin. If there are gaps, the ostomy wafer can become dislodged completely or it can start to leak. Ostomy paste, like many ostomy supplies,
is meant to increase the wear time of your ostomy system while protecting your skin from the stoma output.
Tips for Using Ostomy Paste:
- Clean the skin around your stoma thoroughly so the paste will stay in place better
- Never use soaps that will leave a residue because they can interfere with adhesion
- Make sure your skin is completely dry, modern ostomy products do not adhere to wet skin
- Ostomy paste can be placed on the wafer or directly on the skin
- Ostomy paste can be a cheaper alternative to barrier rings and seals
- Ostomy paste is messier than barrier rings or seals.
Ostomy Paste Methods:
If you are applying the paste to the wafer to fill the gap between the stoma and wafer, then you will need to gently squeeze the tube of paste and follow the small circle in the center of the wafer until you make a ring of paste. If you need to smooth it out with your finger that is fine, it is totally skin safe. You are going to want to put the ostomy paste on the same side of the wafer that goes against your abdomen. Once the paste is in place, you will want to let it set up for a minute so the paste remains in place when you apply the wafer to your stoma. Hold the wafer against your side for a good 30 seconds to make sure the adhesive has a chance to seal. Remember, ostomy paste is not a glue, it is a caulk that will hopefully help your wafer last longer.
Ostomy paste can be used to fill in uneven areas of skin to enable the ostomy wafer to be flush against the abdomen. If your ostomy wafer is right against the skin it will adhere better which should improve wear time. Ostomy paste is not an adhesive but it does work like a caulk. The paste can be applied to the skin or to the wafer and you can place it where you need it. If you have dips or scars around your stoma that keep the wafer from being completely against the abdomen than ostomy paste is a great solution. Once applied, it helps to let the paste set up for a good minute or so to help cut down on the messiness of the paste. Ostomy paste can be used with one-piece ostomy pouches
as well as two-piece ostomy systems
Popular Brands of Ostomy Paste:
- Convatec Stomahesive Paste - By far the most popular ostomy paste, people love the consistency and the aluminum tube because it is easy to get all of the paste out of the tube.
- Hollister Adapt Skin Barrier Paste- Low alcohol content makes this ostomy paste sting less and it is available in a convenient travel size tube.
- Montreal Ostomy No-Sting Osto-Paste - Alcohol free ostomy paste that won't sting or burn broken skin
- Coloplast Brava Sting Free Paste - Alcohol free ostomy paste that has a fresh soap like scent, ostomy paste resists dissolving and break down.